Carpenter Job at ICS, Inc (Industrial Contract Services), Grand Forks, ND

V0FLVURJN0lITlZDL29GSlBvMDBtTGZD
  • ICS, Inc (Industrial Contract Services)
  • Grand Forks, ND

Job Description

General Purpose: Following blueprints or other specifications, a carpenter builds, assembles, installs and repairs fixtures and structures that are made of wood. A carpenter may also work with other materials such as plastic, fiberglass or drywall. Carpenters construct and repair building frameworks and structures—such as stairways, doorframes, partitions, and rafters—made from wood and other materials. They also may install kitchen cabinets, siding, and drywall. Carpenters perform formwork carpentry and sets forms for concrete structures, footings and bridges using hand tools and power. Position and place rebar in concrete forms to reinforce concrete.

Work Schedule: Days and hours vary depending on the assigned project.

Responsibilities & Duties

  • Promote and comply with all Company and safety policies and procedures
  • Measure and mark cutting lines on materials, using ruler, pencil, chalk, and marking gauge.
  • Follow established safety rules and regulations and maintain a safe and clean environment.
  • Verify trueness of structure, using plumb bob and level.
  • Shape or cut materials to specified measurements, using hand tools, machines, or power saw.
  • Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
  • Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue.
  • Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, and power tools.
  • Erect scaffolding and ladders for assembling structures above ground level.
  • Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.
  • Install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.
  • Maintain records, document actions and present written progress reports.
  • Finish surfaces of woodwork or wallboard in houses and buildings, using paint, hand tools, and paneling.
  • Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.
  • Construct forms and chutes for pouring concrete.
  • Layout and installation of reinforcing bar.
  • Fill cracks and other defects in plaster or plasterboard and sand patch, using patching plaster, trowel, and sanding tool.
  • Perform minor plumbing, welding or concrete mixing work.
  • Apply shock-absorbing, sound-deadening, and decorative paneling to ceilings and walls.
  • Maintain a professional appearance
  • Other duties as assigned by Foreman or Superintendent

Required Education

  • High school diploma or equivalent GED.

Required Experience

  • Minimum of three months past experience working as a carpenter.

Required Skills/Licenses/Certifications

  • Valid driver’s license to operate motor vehicles.
  • Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
  • Add and subtract two digit numbers and multiply and divide with 10’s and 100’s, ability to perform these operations using unit weight measurements and volumes.
  • Apply common sense understanding to carry out instructions furnished in written or oral form
  • Workers should be able to work within precise standards of accuracy and follow set procedures and standards

Supervisory Responsibility

  • None

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

  • Able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overhead for extended periods of time.
  • Lift and carry at least 50 to 100 pounds.
  • Climb and descend all types of ladders.
  • Wear personal protective equipment (e., hardhat, eye protection, respiratory protection, fall protection, etc.)

Required Tools

  • See Tool Requirements

Travel Requirement

  • May be required to travel to different jobsites on limited notice

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Position requires working in all elements – heat, cold, rain, or snow – depending on job location and time of year.
  • May require use of personal vehicle for transportation to and from work site.
  • Must be able to utilize job site sanitary facilities (e., Portable Toilets).
  • May require work in restricted areas (e., excavations, utility tunnels, manholes, tanks, crawl spaces, attics, etc.).
  • May require working at various heights, up to 100-feet, from ladders, scaffolds, aerial lifts, catwalks, or other safe work areas.

Job Tags

Similar Jobs

Holtec International

Nuclear Reactor Engineer (RXE) Job at Holtec International

 ...Position: Nuclear Reactor Engineer (RXE) Location: Palisades Energy Holtec Palisades seeks qualified applicants for the position of Nuclear Reactor Engineer (RXE) in its Engineering department based at Palisades Nuclear Power Plant in Covert, MI. Palisades... 

Expedia, Inc.

Principal PM, Strategic Partnerships & Growth Job at Expedia, Inc.

A global travel technology company seeks a Principal Product Manager to drive new product innovation and scale partnerships. This role requires 10+ years of product management experience, a strong background in B2B/B2C, and AI/ML capabilities. The position involves defining...

hth companies

Industrial Insulator Job at hth companies

 ...companies is an industrial services provider offering mechanical insulation, scaffolding, industrial cleaning, and various other services...  ...according to specifications. Candidate will be expected to install, repair, and/or remove insulation on piping, walls, and other... 

Armstrong World Industries

Chemical Process Engineer (PEDP) Job Job at Armstrong World Industries

 ...build engagement and satisfaction to deliver results. Process Engineers at Armstrong World Industries provide technical expertise to...  ...when necessary. Qualifications Bachelor's Degree in Chemical Engineering, Chemistry, Biology, Material Science or Physics.... 

Christus Health

NP, Nurse Practitioner/ PA, Physician Assistant - Urgent Care Job at Christus Health

DescriptionJob Summary We are seeking an experienced Nurse Practitioner or Physician Assistant to join our busy Urgent Care team in New Braunfels, TX . The ideal candidate will have prior urgent care experience and a proven ability to manage patients independently...